|Mold Size:||300 X 450 X 343 Mm||Cavity:||2|
|Mold Life:||1 Million Shots||Runner:||Cold Runner|
HASCO Precision Plastic Mold,
ODM Precision Plastic Mold,
HASCO Precision Injection Molding
PP Material OEM ODM HASCO Precision Plastic Mold Cold Runner
Auto parts- Plastic molds with material PP , two cavities
Issue Solution example:
Description: Warping (or warpage) is the deformation that occurs when there is uneven shrinkage in the different parts of the molded component. The result is a twisted, uneven, or bent shape where one was not intended.
Causes: Warping is usually caused by non-uniform cooling of the mold material. Different cooling rates in different parts of the mold cause the plastic to cool differently and thus create internal stresses. These stresses, when released, lead to warping.
This part for car rearview:
Description: Burn marks are discolorations, usually rust colored, that appear on the surface of the injection molded prototypes.
Causes: Burn marks are caused either by the degradation of the plastic material due to excessive heating or by injection speeds that are too fast. Burn marks can also be caused by the overheating of trapped air, which etches the surface of the molded part.
Description: Jetting refers to a situation where molten plastic fails to stick to the mold surface due to the speed of injection. Being fluid, the molten plastic solidifies in a state that shows the wavy folds of the jet stream on the surface of the injection molded part.
Causes: Jetting occurs mostly when the melt temperature is too low and the viscosity of the molten plastic becomes too high, thereby increasing the resistance of its flow through the mold. When the plastic comes in contact with the mold walls, it is rapidly cooled and the viscosity is increased. The material that flows through behind that viscous plastic pushes the viscous plastic further, leaving scrape marks on the surface of the finished product.
B3Z , Nylon+GF, PC/ABS, PBT+GF, PP, POM, PMMA Accordingly
3D Design Software
Solid works, NX, Pro-E, Auto-CAD(NX, Master CAM) for CAM Software
Automotive,electronic,industrial,architectural,medical,consumer & etc
Precision Injection Molding products for cars spare parts
Single mold, Multi cavity mold accordingly
MOLDMASTERS, YUDO, HASCO, DME, INCOE, SYNVENTIVE
HASCO, LKM, DME
20 injection machines from 50-160tons
Contact Person: Mr. Laurence Wu