|Material:||PA6 GF30||Cavity Steel:||1.2738+Nitriding|
|Mold Cavity:||1+1||Mold Size:||1760X1100X850|
|Mold Life:||300K Shots||Runner:||Moldmaster Hot Runner|
plastic injection mold and molding,
plastic injection molding industry
PA6 GF30 material for Plastic injection tooling of automotive engine mold
Part Issue Solution Example:
Description: Vacuum voids are pockets of air trapped within or close to the surface of an injection molded prototype.
Causes: Vacuum voids are often caused by uneven solidification between the surface and the inner sections of the prototype. This can be aggravated when the holding pressure is insufficient to condense the molten plastic in the mold (and thereby force out air that would otherwise get trapped). Voids can also develop from a part that is cast from a mold with two halves that are not correctly aligned.
Description: Surface delamination is a condition where thin surface layers appear on the part due to a contaminant material. These layers appear like coatings and can usually be peeled off (i.e. “delaminate”).
Causes: Foreign materials that find their way into the molten plastic separate from the finished product because the contaminant and the plastic cannot bond. The fact that they cannot bond not only has an affect on the appearance of the prototype, but also on its strength. The contaminant acts as a localized fault trapped within the plastic. An over-dependence on mold release agents can also cause delamination.
|Mould Base||LKM, DME, HASCO etc ;|
|Cavity Material||1.2738,1.2343, 1.2344, S7, H13, P20HH, GS738H, LKM738H, 718, 8407, S136, Calmax 635 NAK80,|
|SKD-61,NIMAX, 45#, 50#, Aluminum for prototype mold etc.|
|Treatment||Pre-Harden, Nitride, Heat treatment, Quenching|
|Cavity||Single-cavity / Multi-cavity|
|Runner||Cold runner or Hot runner :YUDO/ HUSKY/MOLD-MASTER/SYNVENTIRE/INCO/ MASTIP/ HASCO/ DME|
|Gate||Submarine gate, tunnel gate, side/edge gate, direct gate, pin point gate, sprue gate, diaphragm gate, fan gate, cashew gate, hook gate, hot tip, hot drop, valve gate etc.|
|Plastic material for parts||PS, PA, POM, ABS, PP, PET, PC, PE, HDPE, PA66+GF, PVC, TPE, TPU, TPV etc|
|Mould Life||5000 - 200 0000shots|
|Design Software||UG, CAD, PRO-E, Solid Works etc,|
|Process||CNC, high speed carve, EDM ,wiring-cutting, drill, polish etc|
|Lead Time||10-30 work days depends on the structure and size of products|
|Package||Wooden Case Package or according to customer requirement|
|Price Term||EX Works, FOB Shenzhen, FOB Hong Kong, CFR, CIF, DDU, DDP|
|Payment||T/T, L/C,Western Union ,|
GOM could provide a full turnkey solution for customers bespoke plastic injection moulding needs inclusive of design, development, mould tooling, production and post moulding support for Automotive, consumer electronic,Home appiance , Toys and Games, Communication industries and etc.
|OEM & ODM orders are welcome.|
Contact Person: Mr. Laurence Wu