|Mold Cavity:||1+1||Mold Size:||350X350X250|
|Mold Life:||1 Million Shots||Runner:||Cold Runner|
plastic injection mold and molding,
plastic injection molding industry
PP material for Plastic injection tooling of automotive structure parts
Issue Solution example
Description: Weld lines are actually more like a plane than a line that appears in a part where molten plastics meet each other as they flow from two different parts of the mold.
Causes: Weld lines are caused by the inadequate bonding of two or more flow fronts when there is partial solidification of the molten plastic.
Description: As the term implies, short shots can be described as a situation where a molding shot falls short. This means that the molten plastic for some reason does not fully occupy the mold cavity or cavities, resulting in a portion where there is no plastic. The finished product becomes deficient because it is incomplete.
Causes: Short shots can be caused by a number of things. Incorrect calibration of the shot or plasticizing capacities can result in the plastic material being inadequate to fill the cavities. If the plastic is too viscous, it may solidify before fully occupying all the cavities and result in a short shot. Inadequate degassing or gas venting techniques can also result in short shots because air is trapped and has no way to escape; plastic material cannot occupy the space that air or gas is already occupying.
|Mould Base||LKM, DME, HASCO etc ;|
|Cavity Material||1.2738,1.2343, 1.2344, S7, H13, P20HH, GS738H, LKM738H, 718, 8407, S136, Calmax 635 NAK80,|
|SKD-61,NIMAX, 45#, 50#, Aluminum for prototype mold etc.|
|Treatment||Pre-Harden, Nitride, Heat treatment, Quenching|
|Cavity||Single-cavity / Multi-cavity|
|Runner||Cold runner or Hot runner :YUDO/ HUSKY/MOLD-MASTER/SYNVENTIRE/INCO/ MASTIP/ HASCO/ DME|
|Gate||Submarine gate, tunnel gate, side/edge gate, direct gate, pin point gate, sprue gate, diaphragm gate, fan gate, cashew gate, hook gate, hot tip, hot drop, valve gate etc.|
|Plastic material for parts||PS, PA, POM, ABS, PP, PET, PC, PE, HDPE, PA66+GF, PVC, TPE, TPU, TPV etc|
|Mould Life||5000 - 200 0000shots|
|Design Software||UG, CAD, PRO-E, Solid Works etc,|
|Process||CNC, high speed carve, EDM ,wiring-cutting, drill, polish etc|
|Lead Time||10-30 work days depends on the structure and size of products|
|Package||Wooden Case Package or according to customer requirement|
|Price Term||EX Works, FOB Shenzhen, FOB Hong Kong, CFR, CIF, DDU, DDP|
|Payment||T/T, L/C,Western Union ,|
GOM could provide a full turnkey solution for customers bespoke plastic injection moulding needs inclusive of design, development, mould tooling, production and post moulding support for Automotive, consumer electronic,Home appiance , Toys and Games, Communication industries and etc.
|OEM & ODM orders are welcome.|
Contact Person: Mr. Laurence Wu